Skip to main content

1) Document Information

Version History

2) Scope and Assumptions

This manual is written with the following assumptions.
  • The instructions are based on a setup with 4 locators placed at the corners of the detection area (a space of roughly 15 m × 15 m). If you use more locators or the space has an irregular shape, additional configuration may be required. In that case, contact onesight-support@onecheck.co.kr.
  • This manual covers the downlink method (DL-TDoA) using mobile devices. In the downlink method, mobile devices receive signals sent by the locators and compute their own position.
  • The uplink method, which attaches tags to people or assets, uses different equipment and configuration and is not covered in this manual.

3) Terminology

4) Overall Structure

Set up the positioning infrastructure in the following order. Each step assumes the previous step is complete. For problems during installation or operation, see Troubleshooting, organized by symptom. When new firmware is released, see Applying Firmware OTA for how to apply it.